EN-DC SRB3 Demystified

3GPP 37.340 says that it is up the secondary node to establish "SRB3", but what exactly does this mean and how is it done?

Simple answer: The establishment of a signaling radio bearer (SRB) 3 in EN-DC mode means that RRC Measurement Reports for NR quality can be sent directly to the SgNB. This enables the 5G node to make intra-SgNB handover decisions and start the handover execution without involving the master eNodeB of the connection.

To prevent confusion the figure below shows a simplified scenario in which the Complete/Acknowledgement messages are not mentioned although they will be seen in the message flow.

A prerequisite is the successful addition of 5G radio resources as described in an earlier blog post. After this is completed the UE in the example transmits user plane information over the NR cell with the physical cell ID (PCI) = 12. In the transport network this cell is identified by NR CGI = xxxx52 (where „xxxx“ stands for a valid PLMN-ID and gNodeB-ID).

In the figure below the SgNB sends a X2AP SgNB Modification Required message that carries an embedded NR RRC cG-Config message. This cG-Config message is transparently forwarded by the MeNB to the UE. When arriving at the UE it activates CSI reference signal measurements on the 5G frequency including the serving 5G cell as well as its neighbors. It shall be noticed that here the concept of the Special Cell (SpCell) applies as it was defined for LTE-A CoMP scenarios. 

Instead of the X2AP SgNB Modification Required message the information for activating the CSI reference signal measurements can alternatively transported using the X2AP SgNB Addition Request Acknowledge or X2AP SgNB Change Required message.

In step 2 the UE sends a NR RRC (3GPP 38.331) Measurement Report that indicates a stronger 5G cell (the neighbor cell with PCI = 11) was measured. It might be a vendor-specific implementation to send this NR RRC Measurement Report simultaneously over uplink channels of the LTE radio link where it is carried by the LTE RRC Uplink Information Transfer MRDC (Multi-RAT Dual Connectivity) as well as over NR radio links where it is forwarded by the SgNB to the MeNB embedded in a X2AP RRC Transfer message.

Indeed, it is the SgNB that makes the handover decision, but since the MeNB is in charge of the signaling connection the handover command (here: another NR RRC cG-Config message that orders to switch the 5G radio link to the cell with PCI = 11) must be transmitted to the MeNB by using another X2AP SgNB Modification Required message.

After the UE received the NR CC cG-Config message sent by the SgNB the HO is executed and the 5G cell with PCI = 11 becomes the new primary secondary cell of the EN-DC connection.

Figure: Measurement Configuration, Reporting and Execution for intra-SgNB  Handover 

Guest Post: Exploring Network Convergence of Mobile, Broadband and Wi-Fi

This is a guest post by Ben Toner, Founder and Director, Numerous Networks

Are multiple networks better than one?

How many articles have you read with a title similar to "Which technology is better, 5G or Wi-Fi6?" If, like me, you regularly use Wi-Fi and cellular (I still use 4G though) then you might find it hard to take sides.

Enter Network Convergence - the concept of bringing multiple networks together to get the best of them all. Imagine, as an end user, not having to decide which network to use but instead feeling satisfied that your data was traversing the best combination of networks at that moment in time.

Imagine a business traveler being connected to Wi-Fi which is slow or busy while trying to take that all important conference call while sitting in an airport. Because you are roaming you want to use that Wi-Fi but you do not want to compromise the video call quality. If your network and device could work together to use just enough cellular data to supplement the slow Wi-Fi so that you stayed within your daily roaming quota but never lost a moment in the video call - then you would probably be very happy with that service. Better still, as you start walking off, if the call transitioned from Wi-Fi to cellular with no dropouts or hangup then you might be delighted!

Earlier I underlined best because that in itself is somewhat complicated.  The example above is easy to desribe but quite hard for to achieve within a framework where all possible scenarios are handled that well, for every user. The common questions which need to be factored into any such choice are:

• What do I as the end user want? 
• What performance can each network deliver. 
• How important is the transfer of content at that time and 
• How much am I willing to pay for it (how many MB of my data plan am I willing to use?). 

This is one of the challenges that we cannot easily solve today, but technology is being developed to help in that process. The operators and device vendors are working within standardisation to develop technology which can provide such a converged service. However at this time there is still a rules mechanism behind it all which does not really describe how user input and preference is going to be captured.

In the last 10 years I have witnessed many battles within service providers when deciding what "one size fits all" service to offer everyone when deciding how to make service provider Wi-Fi available to their customers; all fuelled by my points above.

A lot of concepts are well designed and somewhat mature but deciding exactly what will be implemented in standards is currently ongoing.

In the following slides and video I introduce this whole concept of Network Convergence. The following content introduces the concept and then takes a detailed look at the ATSSS; technology being defined in 3GPP. I also have highlighted the technologoies you can get hold of today to try out network convergence.

I encourage you all to download the example technologies and try convergence for yourself. I'm eager to hear opinions of what technologies work best for each of you. And better still, what is not being provided which you think should be...

Looking forward to your feedback and answering your questions...

Network Convergence of Mobile, Broadband and Wi-Fi from 3G4G

Ben Toner
Founder and Director, Numerous Networks

Related Posts:

• Introduction to 5G ATSSS - Access Traffic Steering, Switching and Splitting
• BT's Converged Core to Launch in 2023
• 5G and Fixed-Mobile Convergence (FMC)
• Tutorial: Service Based Architecture (SBA) for 5G Core (5GC)
• Updated 5G Terminology Presentation (Feb 2019)